The FLIR Lepton 3.5 breakout board is designed for use with a FLIR Lepton longwave infrared (LWIR) imager. The breakout board accepts three to five volts of input and regulates it to meet the Lepton's specifications. In order to read the Lepton module, an SPI port is required. The I2C port is optional.
The FLIR Lepton is a radiometric LWIR OEM camera that uses a 60x80 pixel CMOS sensor and a microbolometer focal plane array. It is easy to integrate with other electronics, and is ready to power on and start capturing images. The breakout board for the FLIR Lepton includes example source code and tutorials that help you get started with building your own software.
The Flir Lepton 3.5 breakout board is available with a Raspberry Pi Zero W or an ESP32. In the first challenge, you must write software that will output absolute temperatures in text format. In the second challenge, you must show that you can use low power mode. This competition was previously only available through group buys. Now, you can purchase the Flir Lepton module at Digikey.
The FLIR Lepton 3.5 breakout board has two USB ports and a serial port. The teledyne FLIR Lepton Camera Breakout Board v2.0 provides connectivity for common platforms or custom hardware. The breakout board provides onboard power and master clock and bypasses the local power supplies. It is the perfect tool for any thermal imaging project. It also connects to the FLIR Lepton v2.0.
Using the Flir Lepton v2.0 breakout board for your FLIR Lepton cameras is easy and cost effective. You can use the breakout board in your software development projects and easily access its features. The FLIR Lepton v2.0 is compatible with the Raspberry Pi Zero W and ESP32, so the combination is simple. The board also includes an example source code and a USB cable.
The Flir Lepton v2.5 breakout board supports ESP32 and Raspberry Pi Zero W boards. It also offers an interface to the Flir Lepton v3.5 to USB. It connects FLIR Lepton cameras to custom hardware and platforms. It provides onboard power, master clock, and a host of other features that make it a valuable addition to any thermal imaging project.
The FLIR Lepton 2.5 has a radiometrically-calibrated temperature sensor and a VGA resolution camera. This combination provides users with high-quality imaging with the FLIR Lepton 3.5. This breakout board is also capable of detecting the temperature of surfaces. Its sensors can detect changes in the temperature and humidity in a few seconds. The FLIR Lepton 3.5's thermal imaging core is a unique and powerful component.
FLIR's Lepton Breakout Board V2 is an ARM-based development kit that incorporates a 2.5-inch longwave infrared (LWIR) imager and GPIO interfaces. It supports both I2C and SPI bus interfaces. The Lepton is also capable of supporting VSYNC, which ensures a consistent framerate for video streaming.
The Breakout Board is ideal for connecting Teledyne FLIR Lepton camera modules to custom hardware or common platforms. The Breakout Board features onboard power supplies, a master clock, and USB connection. Its cost-effective design makes it the perfect solution for cost-conscious applications. The Breakout Board V2 is compatible with the FLIR Lepton 3.5 and Lepton 2.0 thermal imaging modules.
The FLIR Lepton Breakout Board is a versatile evaluation board for FLIR Lepton thermal cameras. Its onboard power supplies, SPI interface, and master clock allow users to quickly and easily integrate the system into their applications. The FLIR Lepton Breakout Board V2 also features a specialized software suite for the conversion of the LWIR imager to a compatible platform.
The FLIR Lepton Breakout Board V2 is a versatile evaluation board that can connect the FLIR Lepton thermal camera to a variety of platforms. The Lepton module can be powered with a 3-5V power supply, and the Breakout Board can also supply master clock and local power supplies. The FLIR Lepton breakout board V2 does not provide a USB connection and should not be used in production applications.
The FLIR Lepton 2.5 Breakout Board V2 is a low-cost STM32F3 discovery board. The Lepton's pinout lines up to an Arduino-compatible header. It accepts power from an AREF, which is necessary to get a decent image. Since the Due doesn't have SPI lines, it can't use it for thermal video capturing.
The FLIR Lepton Breakout Board V2 is an easy-to-use evaluation board that connects FLIR Lepton thermal camera modules to custom hardware. The Breakout Board also provides an on-board master clock and power supply. The breakout board is an ideal choice for a range of applications where the SWaP and cost of the camera are important. The FLIR Lepton is a great tool for learning about FLIR technology.
The FLIR Lepton breakout board V2 is an ideal solution for FLIR imaging applications. With its four-eight microns resolution, the FLIR Lepton 2.5 is an ideal choice for thermal imaging. Its small size also makes it easy to integrate into a project. The FLIR Lepton Breakout Board V2 is an inexpensive and convenient way to add infrared thermal imaging to your projects.
Go to the website: https://ccd-detector.com/